VGA/XGA Switcher/Equalized Distribution Amp - 2 Inputs, 4 Outputs

Series:

Model: EZ-VM24E

Inputs and Outputs on HD15 Female Connectors
Two Front-Panel Switch-Selectable Inputs
Wide RGB Bandwidth > 400 MHz Loaded
High Resolution Compatibility VGA through QXGA
Solid-State Switching of Video and Sync Signals

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The EZ-VM24E is a high-resolution computer video source selector and distribution amplifier with two inputs and four outputs. A front-panel switch selects between the inputs. Each input has an associated BIT ID switch to assure compatibility with various computers. The sync for input 1 is front-panel switch-selectable between standard TTL or video. One of the two outputs is indivually buffered for driving the computer monitor. The other three outputs are driven by separate output amplifiers that include rear-panel gain and equalization trimmers that provide adjustable compensation for quality monitor cable lengths exceeding 100 m (300 ft). All switched functions are easily accessible on the front panel. Input switching is fully solid state for long-term reliable immunity from switch noise and the bandwidth limitations of mechanical switches.

Inputs and Outputs on HD15 Female Connectors
Two Front-Panel Switch-Selectable Inputs
Wide RGB Bandwidth > 400 MHz Loaded
High Resolution Compatibility VGA through QXGA
Solid-State Switching of Video and Sync Signals
Reliable Full-Size Switches for Switched Functions
Switch-Selectable TTL or Video 75 Ω Input Sync
NORM ID BIT Connects LOCAL MONITOR and INPUT 1 ID
Front-Panel ID Bit Selection for Each Input
DC RGB Coupling, Output Polarity & Offset Follow Input
Rear-Panel GAIN and EQ Peaking Trimmers
HD15 Input Cable Included - 36¨, 91.44 cm long
Separate video line driver amplifiers for the LOCAL MONITOR and the three MONITOR outputs
All Selector Switches Easily Accessible on Front-Panel

Depth: 5 in
Width: 5.75 in
Shipping Weight: 1.60 lbs
DC Voltage: 24 Volts
Video Bandwidth:: > 470 MHz
Gain:: Unity (LOCAL MONITOR output), Unity to +6 dB (Monitor outputs)
Inputs (2):: VGA - QXGA RGBHV or RGB with combined sync
Outputs (4):: LOCAL MONITOR (1, Buffered, ID bit pass-thru to INPUT 1), Monitor (3, with GAIN and EQ trim)
24 Vdc power supply current:: 70 mA (idle), 90 mA (max.)
Case dimensions:: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size:: 1/3 rack width
Equalization (peaking):: None (LOCAL MONITOR output), Adjustable 0 to +8 dB at 100 MHz (Monitor outputs)
Video impedance:: 75 Ω (Input and output)
Sync (HV) input:: 500 Ω TTL or 75 Ω Video (Switch-selectable), 0.7 V to 5 V p-p
Sync (HV) output:: 5V TTL
Sync (HV) Propogation delay:: < 4 nS typ.
Sync (HV) Rise Time:: < 4 nS typ.
Sync (combined):: Output follows input
Bit Control:: Switch-selectable (individual selector per input, pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
Number of Inputs: 2
Number of Outputs: 4

DA Video Output - Other
DA Video Input - VGA

EZ-VM12 - EZ-VM12 VGA/XGA Distribution Amplifier

EZ-VM13 - EZ-VM13 VGA/XGA Distribution Amplifier

EZ-VM14 - EZ-VM14 VGA/XGA Distribution Amplifier

EZ-VM22E - VGA/XGA Switcher/Equalized Amplifier - 2 Inputs, 2 Outputs

EZ-VMD2 - VGA/XGA Distribution Amplifier - 1X2

EZ-VMD4 - VGA/XGA Distribution Amplifier - 1X4

EZ-VMD4E - VGA/XGA Equalized Distribution Amp - 1X4

EZ-VM24E_INSTALLATION_MANUAL.pdf 661 kb - Instructions

Project List

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths

AV-iQ Terms and Conditions | | Powered by AV-iQ